Metric
Metric electrical takeoff, from the scale to the proposal.
In short: TakeOn is electrical takeoff and estimating software that works in metric. It
reads 1:100 and 1:50 off the title block and checks the scale against the paper
size, so an A3 print of an A1 sheet measures right. Lengths come out in metres and areas in m², from the
drawing to the Bid Summary, exports and proposal. You price per metre in your own currency, with dates and
numbers in your country's format. It's built for estimators in the UK, Ireland, Australia and New Zealand,
and anywhere else that bids in metres.
Does TakeOn read metric scales like 1:100?
Yes. When you upload a drawing set, TakeOn reads ratio scales such as 1:100 and
SCALE 1:50 from each title block and scales the sheet, with no inches-to-feet step. A sheet it
can't read takes a custom 1 : N in Set Page Scale, and owners can add the common metric scales
as one-click presets with Add metric scales under Settings → Workspace → Scales.
A ratio scale is only true on the paper size it was drawn for. Print a 1:100 @ A1 sheet on A3
and it's really 1:200, and measuring it at 1:100 makes every run half its length. TakeOn compares the
stated paper size with the PDF's actual page size, so the A3 copy is read as
1:200 (1:100 @ A1) and you can see why. If a drawing has no usable scale,
Measure a known distance takes a dimension you type in metres or millimetres.
Where do metres and m² show up?
Everywhere a quantity appears. Set the workspace's Units to Metric in Settings → Workspace → General, and the whole estimate runs in metres:
- The drawing
- Run lengths and area labels while you measure, in m and m²
- The Takeoffs panel
- Each template's quantity and section subtotals in m and m²
- The Bid Summary
- Material and labor rows priced per metre and per m²
- Exports
- The Excel and CSV takeoff, with metric quantities and units
- The report and proposal
- The branded PDF report and the client proposal, in metres
- Your AI assistant
- Quantities in m and m², read through the TakeOn MCP connector
Distances you type can be in metres, centimetres or millimetres: 3, 3 m,
300 cm and 3000 mm all mean three metres. Units are set per workspace, not per
project, so a team that bids both imperial and metric work keeps a workspace for each.
How do you price cable and containment per metre?
Give each material a price per metre, and the metres you measured multiply it. A cable priced in £/m, €/m, A$/m or NZ$/m times its measured metres is the line total, with no hidden feet-to-metres conversion to throw the price out by a factor of 3.28. Labor works the same way: hours per metre of conduit or tray, per m² of an area, or per item for a count. Formulas such as a drop allowance are written in metres, and a run's kit takes its measured length in metres.
The currency comes from the country you pick at sign-up: pounds for the UK, euros for Ireland, Australian dollars for Australia and New Zealand dollars for New Zealand. You can change it in the workspace's estimate defaults. A workspace from a metric country also starts in metric, with starter templates and kits in metric values (6 m conduit lengths, drops in metres) rather than feet converted to awkward decimals.
Can an existing workspace switch to metric?
Yes. An owner changes Units in Settings → Workspace → General, and TakeOn converts what was typed per foot: material prices, pack sizes, kit length inputs, and plain labor or cost numbers on linear and area templates. A formula it can't safely rewrite, such as one that adds a fixed length to each run, is left as written and listed under Review units for you to check. Locked bids keep the units they were locked in, so a bid you've already sent reads the same afterwards.
That's also the route for a Canadian team. A workspace from Canada starts in imperial, with the Canadian date format and dollars, and its owner can switch it to metric the same way.
Does TakeOn use my country's date and number format?
Yes. Settings → Workspace → General has a Date & number format with English (UK), English (Ireland), English (Australia), English (New Zealand), English (Canada) and English (US), plus several European formats. On English (UK), dates read 16/11/2026 on screen and 16 November 2026 on PDFs, in the app, on the report and proposal, and in the bid digest email. A new workspace picks its format up from the country chosen at sign-up.
The screens themselves stay in English.
What doesn't TakeOn do in metric?
TakeOn measures, counts and prices in metric. To be plain about the limits:
- No BS 7671, AS/NZS 3000 or AS/NZS 3008 checks. TakeOn doesn't size cables, check volt drop or check containment fill against any national wiring rules. You do that, as you would with any takeoff tool.
- Two calculators are metric; the other code calculators are US code. The free metric voltage drop calculator (mV/A/m) and metric conduit fill calculator (mm) work from figures you type in from the datasheet or your wiring rules, with no built-in tables. The other code calculators at /tools/ and the code articles on our blog follow the US National Electrical Code (NEC), or NFPA 72 for the fire alarm battery calculator. The estimating and cable footage tools there, such as markup, labor burden and bid capacity, follow no code.
- Servers are in the US. TakeOn is hosted in US-East.
For the whole workflow, step by step, read how to do an electrical takeoff in metric.
Works in metric
Common questions from metric estimators.
Can't find an answer? Email contact@takeonbid.com — we read every one.
-
Does TakeOn work in metric?
Yes. A TakeOn workspace set to Metric (Settings → Workspace → General → Units) shows lengths in metres and areas in m² on the drawing, in the Takeoffs panel, the Bid Summary, exports, the PDF report and the proposal, and to your AI assistant. Material prices, labor, formulas and kit inputs are per metre too.
-
Can TakeOn read 1:100 and 1:50 scales?
Yes. TakeOn reads ratio scales such as 1:100 and SCALE 1:50 from the title block and scales the sheet automatically. A scale given with a paper size, like 1:100 @ A1, is checked against the PDF's real page size, so an A3 print of an A1 sheet is read as 1:200.
-
Can I price in pounds, euros or Australian dollars?
Yes. Each workspace has one currency, set from the country you pick at sign-up (pounds for the UK, euros for Ireland, Australian dollars for Australia, New Zealand dollars for New Zealand) and changeable in the estimate defaults. A price per metre in that currency times the metres you measured is the line total.
-
Can I switch an existing workspace from feet to metres?
Yes. An owner changes Units in Settings → Workspace → General. TakeOn converts per-foot material prices, pack sizes, kit length inputs and plain labor or cost numbers to per metre, and lists formulas it can't safely convert under Review units. Locked bids keep the units they were locked in.
-
Does TakeOn check designs against BS 7671 or AS/NZS 3000?
No. TakeOn measures and prices in metric, but it doesn't check designs or cable sizes against BS 7671, AS/NZS 3000, AS/NZS 3008 or any other national wiring rules. Its free metric voltage drop and conduit fill calculators work from figures you type in, with no built-in tables. Its other code calculators and code articles follow US codes: the National Electrical Code (NEC), and NFPA 72 for the fire alarm battery calculator. The estimating and cable footage tools, such as markup, labor burden and bid capacity, follow no code.
-
Where is TakeOn hosted?
TakeOn's servers are in the United States, in US-East. It runs in a web browser on a PC or a Mac, with nothing to install, from anywhere.
Ready when you are
Try it on your next metric bid.
Sign up, drop in a plan set, and start counting in minutes. No credit card needed.