Low voltage

Low-voltage takeoff and estimating, in your browser.

In short: TakeOn is takeoff and estimating software for structured cabling, security, audio and other low-voltage contractors. Pick Low voltage when you sign up and your workspace starts with templates for data outlets, wireless APs, cameras, speakers, access control, CATV and cable runs. Count the drops, draw the runs, and TakeOn adds the service loops and slack, flags any run past 295 ft, and expands each drop into the jacks, plates and patch cords you price.

What does a low-voltage workspace start with?

Seven starter templates: six device counts, each linked to a kit, plus a cable run, and the parts those kits use. Signup asks what your team estimates: Electrical, Low voltage or Both. Low voltage seeds the templates below. They're all named "LV -" so they never collide with electrical ones in a shop that bids both.

Data outlet
Kit: jacks, faceplate, ring, patch-panel ports and patch cords, one set per cable on the drop
Wireless AP
Kit: mount, jack and patch cord
CCTV camera
Kit: mount or box and jack
Speaker / audio
Kit: back can and tile bridge, with an audio zone on each speaker
Access control
Kit: reader rough-in, door contact and request-to-exit
CATV outlet
Kit: F-jack and plate
Cable run
No kit: a measured run with cable type, pathway, cables per run, service loop and slack. You link the cable part you price it from

The parts come with no prices. Every shop buys cable and connectivity at its own numbers, so you price them from your catalog or a supplier's price list, once, and every bid after that uses them. Change any template, add properties such as cable category or mounting height, or build your own for fire alarm, nurse call or anything else the pack doesn't cover.

How do you count drops and measure cable runs?

Click each device on the plan to count it, or use Find Similar to find the rest of a symbol on the sheet and review the matches before they're stamped. A data outlet carries how many cables it takes, so a double drop counts its jacks, ports and patch cords twice.

Draw each cable run from the device back to the telecom room. The cable run template totals it as (length + one service loop per run) × cables per run × (1 + slack %). The service loop starts at 15 ft and the slack at 10%; change either on any run. Two 100 ft runs of two cables each come to 506 ft of cable. A run that crosses onto another sheet still gets one service loop, not one per sheet.

Group the totals by cable type or pathway to see the footage of each. The starter cable run isn't linked to a part, because one part can't price CAT6, coax and fiber at once: link the cable you buy to price it. Our posts on what a low-voltage takeoff includes and counting data drops into a cabling BOM walk through it step by step.

Which runs are over 295 feet?

TakeOn tells you. A linear template can carry a maximum run length, and the starter cable run template is set to 295 ft, the 90 m limit for horizontal copper cabling. The check counts one run's own length plus its service loop and slack, not the extra cables, because the limit applies to each cable.

A run over the limit gets a warning badge on the plan, and its row in the takeoff panel shows how many runs are over. It's a warning, not a block: you decide whether to move the drop, add an IDF or price fiber. Set a different limit on any linear template you use. See how the 295 ft limit works in a takeoff.

How does a counted drop become a priced bid?

Through kits. Each starter device template links an assembly, a kit of parts with quantities. Count 40 data outlets and the Bid Summary lists the jacks, faceplates, rings, patch-panel ports and patch cords they need, each priced from your catalog with its labor hours. From there the estimate adds labor, burden, overhead, profit and tax, and turns into a branded proposal PDF.

Build your own kits the same way: a camera with its mount, box and license, or a door with its lock, power supply and contacts. Our post on what assemblies are explains the idea.

Coming from ProEst?

Your Line Item Library can come with you. On TakeOn's Materials page, Import (ProEst / CSV) reads a ProEst or Forma Line Item Library export into the material catalog: the WBS code becomes a cost code, labor productivity becomes labor hours per unit, and a re-import updates items by Part number. Assemblies and estimates don't import yet, so rebuild the kits you use most and finish open bids where they are.

ProEst Desktop's sign-in cut-off is December 31, 2026 at the latest. Our post on ProEst Desktop's end of life and your options covers each path, and TakeOn vs ProEst compares the two side by side.

Low-voltage questions

Common questions from low-voltage estimators.

Can't find an answer? Email contact@takeonbid.com — we read every one.

  • Does TakeOn do low-voltage takeoff?

    Yes. TakeOn supports two trades, electrical and low voltage. A team that picks Low voltage at signup starts with templates for data outlets, wireless access points, CCTV cameras, speakers, access control doors, CATV outlets and cable runs. The six device templates are linked to kits of parts the contractor prices from their own catalog; the cable run template measures footage, and the contractor links the cable part they price it from.

  • How does TakeOn measure cable runs?

    You draw each run on the plan. The cable run template totals the measured length, adds one service loop per run, multiplies by the number of cables on the run and adds a slack percentage. The service loop starts at 15 ft and the slack at 10%, and you can change both on any run.

  • Does TakeOn check the 295 ft Cat6 limit?

    Yes. A linear template can carry a maximum run length, and the starter cable run template is set to 295 ft, the 90 m limit for horizontal copper cabling. The check counts the run plus its service loop and slack. A run over the limit gets a warning badge on the plan and is counted on its row in the takeoff panel. It's a warning only; nothing is blocked.

  • Can I import my ProEst cost database?

    Yes, the Line Item Library. On the Materials page, Import (ProEst / CSV) reads a ProEst or Forma Line Item Library export into the material catalog, turning the WBS code into a cost code and labor productivity into labor hours per unit. Assemblies and estimates don't import yet, so rebuild the kits you use most.

  • Does TakeOn have fire alarm templates?

    Not in the starter pack. The pack covers data, wireless, cameras, audio, access control, CATV and cable runs. Fire alarm devices and circuits are counted and measured with count and linear templates you set up yourself, with whatever properties and kits you need.

  • Can I use TakeOn for both electrical and low-voltage bids?

    Yes. Pick Both at signup and the workspace gets both trades' templates, kits and parts. A workspace owner can also add the other trade's starter pack later from Settings.

Ready when you are

Try it on your next cabling bid.

Sign up, drop in a plan set, and start counting in minutes. No credit card needed.