Compare

TakeOn vs Countfire.

In short: Countfire is cloud takeoff and estimating software for M&E contractors, and it's our closest rival on counting: select a symbol once and it counts every match across all your drawings. If whole-set auto-count is what you need most, it's a strong pick. TakeOn, also in a browser, is built for electrical and low-voltage estimators and goes further after the count: auto-routed homeruns, panel and fixture schedules into takeoff, spec-book questions with page citations, labor and kits on the estimate, a proposal PDF, and an AI assistant connection (MCP).

Countfire and TakeOn have a lot in common. Both run in a browser on a PC or a Mac, with nothing to install. Both let a team work the same takeoff in real time. Both measure runs, handle revised drawings, and take the quantities on to a priced estimate.

Countfire is ahead on bulk counting. It says one selected symbol is counted across every drawing in the project, and its Smart Select AI names and organises the items as it goes. TakeOn's Find Similar works one sheet at a time: drag a box around the symbol, and review and stamp the matches. Countfire also covers more trades, from fire protection and security to mechanical pipework.

TakeOn goes further on the electrical work that comes after the count. A homerun routes itself to its panel around keep-out zones and across floors. A panel or fixture schedule boxed on the sheet becomes takeoff. A spec book answers a plain-language question with the pages it came from. The estimate carries labor hours and assemblies that expand into priced parts, and ends in a branded proposal PDF. And Claude, ChatGPT or any MCP client can read and work your takeoff and priced bid. The table below says where each one stands.

Feature comparison

How does TakeOn compare to Countfire?

Platform

Feature TakeOn Countfire
Runs in a browser on a PC or a Mac Yes — nothing to install Yes — Countfire says it's cloud-based, on PC or Mac, with no downloads
Real-time team work Yes — live cursors, simultaneous edit on the same plan Yes — teams share takeoffs in real time, and managers get a live view of progress
Trades it's built for Electrical and low voltage M&E — electrical, lighting, fire protection, security and fire alarm, low voltage and mechanical
Metric drawings and units Yes — reads 1:100 or 1:50 off the title block, and works in m and m² through to the proposal. Metric takeoff Check Countfire's pages — they say measurements are scaled to each drawing, but not which units or scales it reads

Takeoff

Feature TakeOn Countfire
Count a symbol across every drawing at once Per sheet in the app — Find Similar searches the page you're on, and you review and stamp the matches. Over MCP, an assistant can search up to 10 sheets from one sample Yes — select a symbol once and Countfire counts every match across all your drawings
AI that names and sorts what it counts No — you pick the template; Find Similar matches the symbol's shape and nothing lands until you accept it Yes — Smart Select names and organises each item as it counts
Cable, conduit and containment runs Yes — linear runs measured at the sheet's scale, totals by run Yes — lengths as connected runs, with elbows and tees added and risers and drops marked
Revised drawings Yes — new versions, the takeoff carried forward, a diff overlay and checkpoint compare Yes — compare drawings visually and count revised drawings, reusing the work already done
Totals broken down your way Yes — any properties and value lists on a template; the BOM rolls up by them Yes — split quantities by zone, even after counting

Electrical depth

Feature TakeOn Countfire
Auto-route a homerun to a panel Yes — around keep-out zones, across match lines and floors, or every device to one panel at once Not on Countfire's product pages that we can find
Panel and fixture schedules captured into takeoff Yes — box the table, map columns, stamp counts Not on Countfire's product pages that we can find
Specifications Ask the spec book a question; the answer cites the exact pages. No side-by-side compare of two spec versions Spec compare — upload two versions of a spec and it marks every change
Connect an AI assistant (MCP) Yes — Claude, ChatGPT or any MCP client, scoped and revocable Not on Countfire's pages that we can find

Estimating

Feature TakeOn Countfire
Where prices come from A workspace material catalog (import CSV, Excel or a ProEst export), plus per-bid project prices Countfire Estimate links prices from your previous estimates
Assemblies (kits) that expand into priced parts Yes — plus a starter library of common electrical kits, priced blank Not on Countfire Estimate's page that we can find
Labor Labor hours on each template or kit part, labor factors, and hours by cost code Not on Countfire Estimate's page that we can find
Markups and job costs Yes — overhead, profit and tax to a sell price, plus job expense and quoted lines Yes — margins, per-product markups and general requirements applied automatically
What you send the client A branded proposal PDF, plus CSV or Excel exports A client-ready Excel estimate

Alternatives

Who should look for a Countfire alternative?

Electrical and low-voltage estimators whose hours go after the count: homerun footage to the panel, panel and fixture schedules, spec questions, labor hours and the proposal the client signs. Those aren't on Countfire's pages that we can find, and they're what TakeOn is built around, in metres and m² as readily as feet. Run it on one bid next to Countfire and compare the hours.

Stay on Countfire if counting is where your hours go and you want one click to count a symbol across the whole drawing set; TakeOn's Find Similar works sheet by sheet in the app. Stay, too, if you price mechanical, sprinkler or pipework jobs alongside electrical: Countfire covers M&E, and TakeOn is built for electrical and low-voltage work.

For electrical and low-voltage work, TakeOn is the alternative we build: takeoff and the priced bid in one browser app, on a Mac or a PC. Other electrical estimating tools we've compared TakeOn with, in no particular order: Accubid, McCormick, Trimble Estimation MEP and zzTakeoff, a browser takeoff tool that covers electrical among other trades. Every comparison we've written is linked at the foot of this page.

Switching questions

Common questions from Countfire users.

Can't find an answer? Email contact@takeonbid.com — we read every one.

  • What are the best Countfire alternatives for electrical estimating?

    For electrical estimating, Countfire alternatives include TakeOn, Accubid, McCormick and Trimble Estimation MEP, plus zzTakeoff, a browser takeoff tool that covers electrical among other trades. TakeOn is browser-based takeoff and estimating for electrical and low-voltage contractors, built for the work after the count, where Countfire is strongest: homeruns auto-routed to a panel, panel and fixture schedules captured into the takeoff, labor hours and kits on the estimate, and a branded proposal PDF from the same takeoff. It runs on a Mac or a PC with nothing installed, and in metres and m² on a metric workspace.

  • Is Countfire better than TakeOn at counting symbols?

    On one point, yes. Countfire says it counts a selected symbol across every drawing in a project at once, and its Smart Select names and organises items as it goes. TakeOn's Find Similar searches the sheet you're on in the app (an AI assistant connected over MCP can search up to 10 sheets from one sample), and you review the matches before any land in the takeoff. If whole-set auto-count is the main thing you need, Countfire is strong there.

  • Does Countfire price a bid?

    Yes. Countfire Estimate, its estimating product, takes quantities from Countfire Takeoff, links prices from your previous estimates, applies margins, markups and general requirements, and produces a client-ready Excel estimate. TakeOn prices from a material catalog you keep, adds labor hours and assemblies that expand into priced parts, and produces a branded proposal PDF.

  • What does TakeOn do that Countfire doesn't?

    As far as we can tell from Countfire's own pages, the electrical work after the count: auto-routing a homerun to its panel around keep-out zones and across floors, capturing panel and fixture schedules straight into the takeoff, asking a spec book a question and getting an answer with page citations, labor hours and kits on the estimate, and connecting an AI assistant such as Claude to your takeoff over MCP. Countfire releases updates often, so check its current pages if one of these matters to you.

  • Does Countfire work in the US?

    Yes. Countfire has a US version of its site alongside its UK and Australian ones, and it says estimating teams in more than 20 countries use it. It's made by Countfire Ltd, part of TAG Software Group.

  • Can I import my Countfire projects into TakeOn?

    No. TakeOn doesn't import Countfire takeoffs or estimates. Its material catalog imports a CSV or Excel price list with a column-mapping step, so a parts list you can get into a spreadsheet comes across. Finish in-flight bids where they are and try TakeOn on the next one.

See it for yourself

See it on your next bid.

Run a real electrical takeoff in the browser today, no credit card needed. Keep Countfire open in the other tab.